Infiltration equipment company: talk about infiltration processing to turn casting into waste

Infiltration processing is widely used as a method for treating pores. In the field of micropore sealing technology, we refer to pores having a diameter of less than 0.254 mm as micropores with respect to the wall thickness of a 5 mm casting. These holes are usually difficult to find with the naked eye. In the automotive power system and pneumatic hydraulic system castings, the presence of micropores will lead to the leakage of the sealed medium, increase the wear of the machining tool, and at the same time increase the production cost, so that the quality of the product is difficult to be guaranteed. It will lose its proper function during the use of the product. The infiltration equipment company said that the infiltration technology can turn waste into treasure, and these unqualified products can meet the qualified standards.

1. Turn waste into treasure. In the production process, due to micropores, sand holes, cracks, micropores and other phenomena, the parts will be unqualified. After infiltration processing in our factory, it will become qualified and rework free, reducing the scrap rate for you. Save losses caused by non-conforming products.

2. After impregnation treatment, it does not affect the surface precision of the workpiece, does not corrode the metal, and is completely harmless to the environment.

3. 100% reaction curing does not shrink, the cured product is tough and resistant to aging, and is resistant to chemical media. It can seal 1.5um ultra-fine pores.

4. The powder is infiltrated after sintering, which can speed up the processing and greatly extend the tool life.

5. Castings are electroplated and impregnated before painting, which can extend the life of parts and make the surface treatment quality excellent.